Monitoring of constructed wetland for groundwater remediation

About this project

client
Hasbro, Inc.
location
Minnesota
completion date
2004 (performance monitoring); ongoing (compliance monitoring)

A slow-moving plume of chlorinated solvents extends from a former manufacturing facility northward to a channel connected to Lake Minnetonka in the western Twin Cities area. This plume had been in the subsurface for many years and was being slowly degraded into environmentally safe compounds by natural processes, but the Minnesota Pollution Control Agency (MPCA) was concerned that even a small flow could affect the surface water.

Because a pump-and-treat system would be resource-intensive and alter existing mechanisms, Barr designed a constructed wetland that enhances the already occurring natural attenuation and developed a plan that generated public and MPCA support. Our design included a barrier to passively control and direct groundwater flow through the reconstructed wetland, where mechanisms bio-stimulate the attenuation process.

To address the MPCA’s requirement of four years of wetland performance monitoring to evaluate the effectiveness of the wetland treatment system’s operation and maintenance, Barr developed an innovative performance monitoring program. This included maintaining the wetland’s operation by promoting growth of desired plant species and monitoring the wetland hydraulics, chemicals of concern, wetland geochemistry, and surface water immediately downgradient of the wetland. After four years of performance monitoring, the data showed the wetland operates as designed and provides a permanent, successful, low-cost treatment system while also serving as a park area for the community.

Key team members

Jamie Bankston

Vice President
Senior Environmental Engineer

Brad Schwie

Senior Geological Engineer

Don Richard

Vice President
Senior Civil Engineer

Joe Berns

Vice President
Senior Engineer

Related Contaminated site management projects

Landfill-gas monitoring at remediated dump to support brownfield redevelopment
Air dispersion modeling for distributed-generation plant
Landscape master plan for watershed district
O&M manual for green-infrastructure stormwater BMPs
Design and prioritization of spillway gate repairs
Engineering design for HDD pipeline replacement under highway
Incident energy and arc flash hazard analyses of three facilities
Natural-resources management plan for suburban park
Feasibility design and inspections of an urban stormwater-management tunnel
Vapor intrusion investigation and mitigation in a residential neighborhood
Dam safety consultations for SaskPower
Redevelopment services for Surly destination brewery
Mine closure and reclamation
Stormwater storage facility for major Minneapolis interstate artery
Water-quality and sediment-dredging study to restore a phosphorus-impaired lake
Waste-gas scrubber design engineering for taconite pellet plant
Inspection and repair of urban stormwater tunnels
Environmental liability assessment at manufacturing facility
Bridge movement monitoring
Engine compliance tool update
Natural resources master plan
Embankment stabilization along Highway 73
Multi-site PFAS remedial investigation and remediation
Flood forecast mapping for city's emergency response and planning efforts
Air-quality permitting and compliance support at pipeline terminals
Environmental permitting and compliance support at terminals
Improvements to municipal flood-risk-protection system
Monitoring and maintenance of remediation system at wood-treating site
Groundwater-surface water study of McKenna Lake
Highway 55 storm-tunnel inspection
Highwall stability assessment
Infrastructure inspection program for Minnesota watershed district
GHG compliance monitoring for oil sands facility
Air-quality-permitting support for refinery assets
Whitewater State Park stream restoration
Hennepin County sustainable landscape guidelines
Spillway design for iron-ore-mining and mineral-processing facility
Water quality and ecological improvements to an urban lake
Developing health assessment tools for wind-turbine towers and foundations
Hydrology and hydraulic modeling of a tunnel system
Concept-level design of wastewater discharge option
Vapor-mitigation implementation and maintenance at business center
Environmental review and permitting for natural-gas-distribution projects
Minnehaha Park lower glen restoration
Design of an LED lighting system for a downtown streetscape
Permitting and compliance services for oilseed-processing plant
Fast-track realignment of a storm sewer
Municipal drinking-water wellhouse evaluation and design
Restoration of trout habitat in Vermilion River
Remedial investigation, negotiation, and design for Superfund site
Stormwater-development reviews for an urban watershed district
Support for decommissioning and demolition of manufacturing facility
Groundwater modeling for water-supply wellfield expansion
Structural and electrical engineering for coal-dryer load-out improvements
Environmental review for natural gas pipelines
Water reuse evaluation for zero liquid discharge at manufacturing facility
Poplar Bluff substation upgrade
Transmission line upgrades for reliable power delivery
arc-flash analysis at Coal Creek Station
Willow River Dam rock arch rapids design services
Permitting assistance for partial repowering of wind facility
Environmental review and permitting for windfarm repowering
Air-quality services for steel company
Design for spillway replacement at Bond Falls Dam
Hastings levee certification
Analysis of microbial ecology in selenium bioreactor
Statistical analysis of coal-silo vibrations
PFAS mass balance and sample collection
Upgrades to mineral processing plant
Calculating stormwater fees via remote-sensing technology
Gate upgrade at Island Lake Dam
Acid-generating rock identification and mitigation
Blaine water treatment plant 4
Permitting and nondegradation services for sugar-beet facility
Cathodic protection design for pipeline projects
Grassy Point and Kingsbury Bay habitat restoration
Engineering and design for the rehabilitation of Karey Dam
PFAS stack testing services for a manufacturing client
Tailings dam safety inventory and semiquantitative risk analysis
Park and water-feature evaluation and renovation
Rock-fall protections at Interstate State Park
Environmental services at manufacturing facility
Assessment of PFAS use
Air permitting assistance for manufacturing coating facility
Air permitting assistance for pharmaceutical facility
Water reuse system design
Trichloroethylene (TCE) investigation and remediation
RCRA waste tank inspection, certification, and closure
Redesign and optimization of crystallizer piping
Air permitting assistance for reaction-injection molding operation
Environmental permitting and engineering design for biomass carbon production
Permitting and field review for natural gas pipeline replacement
Multi-phase levee alterations for the City of Des Moines, Iowa
Third-party dam safety review of tailings-storage facility
Engineering services for industrial landfill expansion and closure
Wastewater antidegradation analysis and NPDES permit renewal
Comprehensive water audits at manufacturing facilities