Landslide stabilization protects architectural treasures

About this project

client
University of Mary
location
North Dakota
completion date
Ongoing

Just south of Bismarck, the University of Mary stands atop a 175-foot-tall bluff overlooking Apple Creek and, farther out, the Missouri River. The campus’s first buildings, designed by celebrated midcentury-modern architect Marcel Breuer, frame the sweeping landscape through generous windows, angular outdoor structural elements, and cutouts in concrete walls.

The Sisters of the Annunciation who founded their monastery and school in the 1950s were keeping up the Benedictine tradition of building communities on inspiringly high ground, but there was little awareness at the time that slopes along North Dakota’s river valleys have their own tradition: succumbing to landslides, due to layers of weak clay and groundwater. The bluff supporting the campus, which Breuer referred to as the Jewel of the Prairie, would gradually begin deteriorating in a phenomenon known as “rotational slump.”

In 2015, the University of Mary, in cooperation with the North Dakota Department of Emergency Services and the Federal Emergency Management Agency, began working to address three landslides posing risks to the campus—not only the historic Breuer buildings, but several that had been added in the intervening decades, as well as a cemetery where the monastery’s nuns are laid to rest.

In late 2021, Barr began studying and designing stabilization measures for the largest landslide, which over the years had been advancing toward the cemetery. In a preliminary geotechnical assessment, we fed existing subsurface-drilling, groundwater-monitoring, and lidar data into GeoStudio’s SLOPE/W software to develop an initial model of the slope and evaluate options for stabilizing it. The model indicated that a combination of approaches would be necessary to halt the landslide.

Barr then conducted an in-depth geotechnical investigation that included new soil borings to collect a variety of samples as well as to install inclinometers and vibrating-wire piezometers that measured subsurface deformation and groundwater pore pressures, respectively. The soil samples were tested in a laboratory to characterize shear strength, permeability, and soil chemistry, and we incorporated the resulting data into a final seepage, stability, and deformation model created with the advanced numerical modeling program FLAC. The model also allowed us to account for the interaction between soil and structural stabilization elements known as auger-cast piles (11 vertical steel rods surrounded by a spiral steel cage set in cement grout).

The geotechnical investigation and analysis confirmed that two approaches were needed to stabilize the slope:

  1. removing more than 70,000 cubic yards of earth from the top portion of the landslide

  2. installing 65 piles extending as deep as 75 feet below the surface to anchor the soft, sliding soil mass to the stronger, more stable ground below

Over the summer and early fall of 2023, about half the earth excavated from the upper portion was shifted to the lower slope, which reduced the steepness of the original grade by nearly 65 percent, and the auger-cast piles were installed to inhibit future ground movement while raising the slope’s factor of safety by 25 percent.

Together, the measures will minimize further slumping at the bluff—preserving the unique architecture of the university buildings and monastery, as well as the cemetery honoring the nuns who established the community and taught and served at the school.

Key team members

Jed Greenwood

Vice President
Senior Geotechnical Engineer

Russ Sheets

Senior Geotechnical Engineer

Related Other Sectors projects

Park and landscape design for Mouse River enhanced flood protection project
Design of abutment wall extension at Dells hydro station
Coffee Creek trout stream restoration
Dry-stack tailings management
Tailings basin expansion and closure options
Investigation and remediation of jet-fuel release
Vapor intrusion investigation and mitigation in a residential neighborhood
Snowpack monitoring and lake drawdown for Minnesota watershed district
Penn Avenue sinkhole investigation and rehabilitation
Engineering and design for Universal Studios’ rapids ride
Landslide stabilization design for an underground coal mine
Advanced oxidation process pilot evaluation for municipal drinking-water system
Stormwater treatment wetland for Minnesota college arboretum
RICE applicability analysis and audit
Sustainable landscape master plan for Minnesota college campus
Responding to wind-farm tornado damage
Evaluation of wind-turbine foundation following fire damage
Groundwater modeling for wellhead-protection-plan amendment
Multi-site PFAS remedial investigation and remediation
Sediment removal from beneath Vermillion River bridge
Monitoring of end-pit lake at oil sands mine
Flood risk reduction of suburban lakes
Letter of map revision for Minnesota city
Options study and design to restore biomass fuel-handling system
Mine remediation and reclamation
Fish-habitat and floodplain restoration of a Minnesota trout stream
West River Parkway landslide repair
Self-contained bog built on college roof
FERC relicensing of Ford Lake Dam
Groundwater compliance assistance for CCR Rule
Natural channel design for aquatic organism passage
Engineering and design for SeaWorld’s Infinity Falls water ride
Floodproofing of utility switchyard
Structural monitoring of sanitary sewer line
Flood mitigation at refinery
Wetland replacement assistance for highway project
Environmental support for post-fire cleanup at industrial facility
Lilydale Regional Park stormwater management and slope stabilization
PFOS investigation at municipal wastewater plant
Landscape master plan for Minnesota college campus
Response to denatured ethanol release
Aquatic invasive species (AIS) management in a Wisconsin lake
Solar-energy-system compliance
Berm-failure study at saltwater disposal well site
Preliminary feasibility study for PFAS-related water quality concerns
Rockford dam removal
Groundwater modeling and remedial improvements at closed landfills
Stressor-identification report for an impaired urban stream
Post-flood stream assessment and natural channel design
Redevelopment of former Mayflower Mine
Water-quality and structural monitoring for channel dredging
Spillway redesign at Cedar Falls Hydro Generating Station
Flood risk management system upgrades and FEMA certification
PMF modifications at hydroelectric plants
PMF study for the Dead River
PFAS mass balance and sample collection
PFAS treatment during power plant decommissioning
TMDL study and water quality assessment for a suburban stream
Gas processing equipment, outage procedure and fitness-for-service evaluation
PFAS stack testing services for a manufacturing client
AWIA risk and emergency compliance for urban drinking water
Environmental assessment program for highway safety improvements
CFD modeling of stormwater tunnels
Environmental services at manufacturing facility
Design of repairs to leaking reservoir
Trichloroethylene (TCE) investigation and remediation
RCRA waste tank inspection, certification, and closure
Air permitting assistance for reaction-injection molding operation
Road raise and conceptual design
Reasonably available control technology analysis for refinery
Flood-control-system upgrades and certification
Strategy for collecting lake-morphometry data
Tailings facility dam safety review
Comprehensive water audits at manufacturing facilities