Steam-line evaluation at Rapids Energy Center

About this project

client
Minnesota Power
location
Minnesota
cost
$63,000 (Barr's fees)
completion date
2014

Minnesota Power wanted to evaluate potential modifications for a paper machine at its Rapids Energy Center. The proposed tie-in would direct steam in a singular path that would allow use of desuperheaters to reduce steam temperature and provide better operating control.

After performing an initial evaluation, we suggested a review of the 50-pound steam line to determine actual pipe routing, existing turbine loading, defective support locations, and sagging piping locations. We performed 3D scanning to create a model and develop a baseline of the existing system. By conducting a pipe stress analysis, we compared existing forces and moment loads to the original allowable design loads and identified problem areas. Issues existed with pipe supports, horizontal pipe sag, and exceedances in allowable turbine force and moment loads.

Barr recommended two options for analyzing the piping system before modifying tie-ins and pipe and routing supports. We then analyzed three load-case conditions, calculated the loads, and compared them to the original design loads. We also presented two support options with pipe-routing and turbine-nozzle load variations.

In the project’s second phase, Barr conducted pipe stress analysis for both support options. We then designed the new piping system, verified piping changes, and sized new supports. Minnesota Power proceeded with tie-in modifications to the paper machine, following piping and support-hanger modifications recommended by Barr.

Key team members

Jim Keenan

Senior Mechanical Engineer

Related Coal projects

Spillway upgrades at St. Cloud Dam
Testing and optimization of fine-tailings drying technologies
Air dispersion modeling for distributed-generation plant
Third-party transmission-line construction monitoring
Design of abutment wall extension at Dells hydro station
Groundwater monitoring for Fridley Filtration Plant rehabilitation
Engineering services and permitting assistance for Bison 2 and 3 wind farms
Dam safety consultations for SaskPower
Geotechnical, structural, and civil work for Canadian wind farm
Redevelopment services for Surly destination brewery
Groundwater modeling for 1,4-dioxane
First-of-its-kind spent-lime stormwater BMP treatment system
Electric-energy resource options study
Design services for solar generation facility
Albert Lea Lake outlet modifications
Oxbow-Hickson-Bakke ring-levee flood protection
Engineering services for pipeline reversal
Bathymetry and sediment studies for dredging and restoration of Minnesota lake
Environmental integration support for Wamsutter Crude Oil System
Study of engineering risks and site feasibility for windpower client
Engineering and design for Universal Studios’ rapids ride
Retrofit design for a city-campus parking lot
Greenway design to treat stormwater and mitigate flooding
Environmental review for proposed natural-gas pipeline
Inspection, design, and construction oversight for tunnel rehabilitation
Stormwater retrofits along redesigned urban streets
Stormwater treatment wetland for Minnesota college arboretum
EMIS implementation and related assistance
Expansion of landfill-gas-fired power generation facility
Installation of new auxiliary boilers for power plant
Permitting and environmental review for pipeline terminal expansion
Responding to wind-farm tornado damage
Earthen embankments reduce flooding and sediment loading in rural creek
Upgrades and expansion for silica-sand wet plant
Reclamation of legacy tailings site
Evaluation of wind-turbine foundation following fire damage
Engineering services for frac-sand operation
Engine compliance tool update
Project prioritization tool for Minnesota watershed district
Test burn for cofiring coal and biomass
Transmission line EIS
Flood-control modeling and system upgrades in urban neighborhoods
Sustainable site design for watershed district headquarters
Green infrastructure treats stormwater along light rail corridor
Engineering services for municipal wastewater-treatment facility
Powerhouse and turbine replacement at Redwood Falls
Permitting and wetland delineation for a community solar garden
Penstock replacement at McClure Dam
Creation of LID master plan for stormwater management
Demonstration rainwater gardens reduce stormwater runoff
Options study and design to restore biomass fuel-handling system
Air permit-to-install strategy and application
Air quality permitting for distributed-generation plant
Discovery Point ecological restoration
Fish-habitat and floodplain restoration of a Minnesota trout stream
Investigation and design for Freeway Landfill
Stormwater basin retrofits for water quality improvement
Site reviews for solar gardens across Minnesota
Engineering design for crude-oil-terminal pipe rack
Self-contained bog built on college roof
Landslide stabilization and corridor repair for state highway
Engineering design for pipeline pump stations and terminals
Tailings-management area design and construction
Gate automation for the Soo Locks compensating works
Groundwater compliance assistance for CCR Rule
Developing health assessment tools for wind-turbine towers and foundations
Natural channel design for aquatic organism passage
Natural stormwater-treatment system and park redevelopment
Engineering and design for SeaWorld’s Infinity Falls water ride
Condition assessment and options study for hydro facility
Floodproofing of utility switchyard
Sweeney Lake and Schaper Pond water-quality improvement
Upgraded Mouse River levee system manages flood risk
Environmental review and permitting for natural-gas-distribution projects
Hall's Island and Scherer site reconstruction
Structural monitoring of sanitary sewer line
Minnetonka Mills Park design
Engineering services for industrial chemicals mine and processing facility
Trona-mining production optimization
Permitting and compliance services for oilseed-processing plant
Remediation and redevelopment of historic dump
Environmental review for peaking plants
Flood risk reduction for North Dakota city
Engineering and design services for new truck dumper
Stormwater-basin retrofits improve water quality and habitat
Solar-energy-system compliance
Natural stormwater-treatment system and park redevelopment
Cost analysis for meeting water quality standards
Green infrastructure retrofit of an urban shopping-mall parking lot
Auxiliary boiler installation
Dry Spotted Tail Creek stream restoration
Remediation and residential redevelopment of Whitehall Leather site
Regulatory-compliance assistance for Freeway Landfill
Retrofit engineering for ash conveyance
Hall’s Island redevelopment and restoration
City of New Brighton water treatment plant design
Design and permitting for WISCO Oilfield Special Waste Landfill
Energy integration study for waste-heat utilization
Environmental services for coal-yard decommissioning
Chlor-alkali process design
Support for decommissioning and demolition of manufacturing facility
Option study and design for air jig dewatering system
Permitting, design, and construction oversight for CCR surface impoundment
Brownfields redevelopment for watershed district headquarters
Preliminary design for PFAS-related drinking-water treatment
Renovation of historic Peavey Plaza in downtown Minneapolis
Transmission-line permitting assistance
Structural and electrical engineering for coal-dryer load-out improvements
Air permitting for petroleum refinery’s waxy-crude processing project
Environmental review for natural gas pipelines
Redevelopment of former Mayflower Mine
Poplar Bluff substation upgrade
Permitting for greenfield renewable diesel production facility in Utah
Transmission line upgrades for reliable power delivery
Permitting for the conversion of a petroleum refinery to renewable diesel production
Preclassification system feasibility study, design, and construction support
arc-flash analysis at Coal Creek Station
Study of solar developments on closed Minnesota landfills
Geotechnical investigation for the East Valley Battery Storage Facility
Geotechnical investigation of pumped-storage hydroelectric facility
Preliminary geotechnical engineering and geophysical investigation
Seneca solar project geotechnical engineering services
Conceptual development for Coal FIRST initiative
Pre-FEED study for Coal FIRST initiative
Civil engineering services for 10 MW solar facility
Structural analysis and evaluation of powerhouse
Above-ground tailings management and mine backfill
Permitting assistance for partial repowering of wind facility
Environmental review and permitting for windfarm repowering
Mitigation of aerosol impacts from coal combustion
Spillway redesign at Cedar Falls Hydro Generating Station
Hydropower facility evaluation and improvement recommendations
PMF modifications at hydroelectric plants
Design for spillway replacement at Bond Falls Dam
Crane walk geotechnical engineering at Kings Point wind site
PMF study for the Dead River
Rushford levee system remediation
Cyclic degradation geotechnical evaluation for wind turbine foundations
Aggregate resource estimate along proposed pipeline routes
PFAS treatment during power plant decommissioning
Gate upgrade at Island Lake Dam
PFAS-impacted drinking water response and treatment plant design
Hydrogen generator process skid design
Solar on reclaimed coal mine, settlement and subsidence risk analysis
Design of gas storage well pipelines and well pads
Pipeline and facility outage procedure
CFD modeling for spillway replacement
Engineering services for solution mine
Geotechnical engineering and environmental services for oil refinery solar farm
Process and plant design for potash mine
Park and trail conceptual design for the city of Biwabik
Water reuse system design
NEPA support for coal mine expansion
Environmental support for solar power facilities
Desktop study and geotechnical investigation for new wind power site
Environmental permitting and engineering design for biomass carbon production
Wind farm repowering structural assessment
Purgatory Park restoration master plan
Renewable energy development plan
Carbon-capture-system feasibility study
Engineering services for industrial landfill expansion and closure
Air permitting for refinery conversion from petroleum to renewables
Implementing a dual fuel system for peaking plant
Environmental planning and permitting for solar-generation and battery-storage project